Showing all 7 results

Pure Epoxy Solids DIY KIT

EpoxyPRO PURE 100% Solids Epoxy DIY KIT is an industrial grade/food grade, two component epoxy coating designed for interior applications where an impact resistant floor is needed. It produces an attractive high gloss finish floor that can increase light reflectivity up to 400% and is tough enough for heavy manufacturing or the harshest industrial environments but beautiful enough for your home or office. With a smooth finish or with an optional slip-resistant broadcast, to decorative single color fleck or multi-color signature blends, textures and finishes, the application process is simple to create an easy to clean, fresh new look to protect or restore your concrete floors.

 

MSDS download >

Pure 100% Tech Data

EpoxyPRO Pure Epoxy Floor Coatings come in a wide range of beautiful colors and finishes, thereby providing the perfect finishing touch to your project. Transform living, recreation and office spaces with your own personal sense of style. Bring that outdated den to life, energize your loft, add the “Kool” factor to your Man-Cave, She-Shack, or wake up that tired old laundry room. Painting with epoxy is affordable and can last a lifetime if applied correctly, removing the need of future replacement as is required with most other floor coverings. So don’t wait, create a fresh and easy to clean space for your family and guests.

Durability – “One and Done” Floor Solution

100% Solids Industrial grade epoxy is often overlooked when it comes to resurfacing your home or office floors. Conventional flooring like carpet and wood are susceptible to staining and can easily succumb to scuffing, abrasion and/or moisture. Tile, wood and vinyl are all good choices when remodeling but what if you could create a look that’s unique and never needs replacing?

Tired of spilled drinks and food staining your floors?! NO WORRIES! Fortunately, cleaning is easier with EpoxyPRO your “One and Done” durable, non-porous-non-staining, chemical resistant, high gloss seamless floor system is easy to clean and Maintenance Free!

Pure Epoxy Finishes:

  • 10 BEAUTIFUL COLORS
  • 6 SIGNATURE BLENDS OF MULTI-COLOR PAINT CHIPS
  • #46 GRIT ALUMINUM OXIDE SLIP-RESISTANT AGGREGATE
  • 1 AND 2 COMPONENT POLYURETHANE TOPCOATS

Pure Epoxy Features:

  • Maintenance Free Seamless Floor
  • Industrial Grade Floor Coatings
  • Food Grade Floor Coatings, USDA Approved
  • NO VOC’s Solvent Free 100% Epoxy solids with low to no odor
  • Chemical, Acid, Oil, and Salt Resistant
  • Slip Resistant
  • Easy to Clean Non-Porous High Gloss Finish
  • Up to 400% Increased Light Reflectivity
  • Affordable
  • 20+ year life span, under normal wear & tear
  • DIY Kits – tools included
  • Easy to Apply

 

TECHNICAL DATA (Pure 100% Epoxy)

PRODUCT DESCRIPTION:
EP 600 Series is a two component 100% (+/- 1%) solids epoxy colored coating designed for applications where a high build colorfast impact resistant floor is needed.

RECOMMENDED FOR:

Recommended for a high build topcoat or base coat on concrete or masonry.
Product is suitable in many chemical exposure environments.

SOLIDS BY VOLUME: 100% (+/- 1%)
VOLATILE ORGANIC CONTENT: Less than 2 g/l
STANDARD COLORS: White, off white, light gray, medium gray, tile red, and beige
RECOMMENDED FILM THICKNESS: 12-30 mils
COVERAGE PER GALLON: 53-130 square feet per gallon @ 12-30 mils
PACKAGING INFORMATION:3 gallon kits (2.9 – 3.0 gallons net approx.)
15 gallon kits (14 – 15 gallons net approx.)
MIX RATIO:12 pounds (1 gallon) part A to 4.15 pounds
(.50 gallons) part B (volumes approx.)
(standard colors)
SHELF LIFE: 1 year in unopened containers
FINISH CHARACTERISTICS:Gloss (70-95 at 60 degrees @ glossmeter)
ABRASION RESISTANCE:Taber abraser CS-17 calibrase wheel with 1000
gram total load and 500 cycles = 32 mg loss
FLEXURAL STRENGTH:5,400 psi @ ASTM D790
COMPRESSIVE STRENGTH:9,100 psi @ ASTM D695 – 1/2 ”X 1/2” bars
ADHESION: 450 psi @ elcometer (Concrete failure, no delamination)
VISCOSITY: Mixed = 1300-2300 cps
(typical, most colors)
DOT CLASSIFICATIONS:Part A not regulated
Part B CORROSIVE LIQUID N.O.S., 8, UNI1760,
PGIII
TENSILE STRENGTH: 4,800 psi @ ASTM D638
ULTIMATE ELONGATION: 3.1% GARDNER VARIABLE IMPACTOR: 50 inch
pounds direct – passed
HARDNESS: Shore D = 80
PRIMER: Recommended waterbased primer
301P or EP 600.
TOPCOAT: Optional – 401U AND 402U
aliphatic urethanes can be used for increased
chemical resistance or increased UV stability.

$8.95$447.50
error: Content is protected !!